Bar Burner/Collector Assy

Bar Burner/Collector Assy

Model #4505085
$25.99

  • Measures approximately 22.25"L
  • Please check your owner's manual to make sure this part will work with your grill.
  • Replaces part number 4505069 and 4505078


    Not sure if this part will fit?

    How do I find my model number?
    $25.99

    Specifications

    • Manufacturer: Char-Broil
    1
    1

    if i order burner assembly will i get 2 valve clips?

    Asked by: ronr785
    The burner does not include the venturi clip. Each venturi clip is model # 4151043 and is available on the Char-Broil site.
    Answered by: DustinR
    Date published: 2015-07-23

    What does this come with the electrode that was on the other one is rusted and has broken off so I hope this one comes with a new one is that the case? Model number 463841704.

    Asked by: Big Country Griller
    Yes. The electrode is included. It can be seen in the picture on our site. It is in the center of collector assembly.
    Answered by: DustinR
    Date published: 2015-07-14

    the end where it is connected to gas had small clips attached to burner we are putting a replacement burner on and the piece is not with the new burner so there is a gap where gas will leak out

    Asked by: JimBeaudoin
    Please give us a call at 1-800-241-7548 and provide us with the model number for your grill so that we can best investigate this.
    Answered by: DustinR
    Date published: 2015-07-13

    I have a Model # 4639121 My burner part # is 4505010...What is the replacement part??

    Asked by: Donald 5
    The burner for your grill is model # 4505085. This part is available on the Char-Broil site.
    Answered by: DustinR
    Date published: 2015-07-13

    i have a charbroil grill model # 4638119 i need to replace the burner

    Asked by: rjbordo
    Model # 4505085 is the correct burner for your grill.
    Answered by: DustinR
    Date published: 2015-07-11

    Does this include the centuries tubing?

    Asked by: michele67
    Yes. This burner does include the venturi tubes.
    Answered by: DustinR
    Date published: 2015-07-10

    How do I install this burner, what do I have to remove to install it.

    Asked by: steven77
    This burner should just slide directly over the gas valves. Please give us a call at 1-800-241-7548 and we will be able to provide removal and installation information.
    Answered by: DustinR
    Date published: 2015-07-07

    Will burner w/collector #4505085 fit on my quickset model #463811905, serial 0503257265, product #4638? Burner is OK but collector box is rusted off and can't remove screw/bolt. I assume I also need the igniter wire that goes from igniter to collector box

    Asked by: witzy
    Model # 4505085 is the correct burner for your grill. The ignitor wire for your grill is model # 4153196. This part is also available on the Char-Broil site.
    Answered by: DustinR
    Date published: 2015-06-25
    • 2015-07-30T06:40CST
    • bvseo_cps, prod_bvqa, vn_cps_3.1.5
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_39
    • loc_en_US, sid_4505085, PRD, sort_recentAnswersFirst
    • clientName_Charbroil