Absolutely The Easiest Smoking Experience. Digital Electric Smokers - Learn More!

Burner Brace

Burner Brace

Model #80012481

  • Measures approximately 23.5"L
  • Please check your owner's manual to make sure this part will work with your grill.
  • Replaces part numbers 80002930, 80002950, 80000683 and G40803000000

    Not sure if this part will fit?

    How do I find my model number?


    • Manufacturer: Char-Broil
    Burner Brace is rated 4.3099 out of 5 by 171.
    Rated 1 out of 5 by from Rusting Burner Brace My grill is okay overall, but lots of rust on non-stainless material. Burners replaced under warranty twice already. Burner brace rusted away within 2 months.
    Date published: 2014-06-10
    Rated 4 out of 5 by from BURNER BRACE DISINTEGRATES In general this is a good product. It cooks as well or better than the new, infrared grills. However the carry-overs disintegrate after a year or two producing a huge hot spot at the rear of the grill. The burners disintegrate too and have to be replaced. C'mon Charbroil! If we can make rocket motors, surely there is a metal which will resist the heat levels created in a home grill and not disintegrate. The hot sport IS actually useful for searing, and it is necessary to use all three burners at full to sear even one little steak or hamburger.
    Date published: 2015-09-16
    Rated 2 out of 5 by from Must replace every year The heat of the propane melts the brace. I must replace at least every 2 years if not every year. It needs to be made out of a much higher grade metal.
    Date published: 2015-04-28
    Rated 1 out of 5 by from This is the third burner brace I have had to replace. They just fall apart after a year of use.
    Date published: 2014-06-30
    Rated 5 out of 5 by from It Worked as advertised I needed to replace a few parts on my grill and the burner brace was one of them. Noting that the dimensions seemed to be different than my original part I was skeptical but a Char-Broil rep assured me it would work fine. Well it is installed and fit perfectly. The part is different but is made to be universal with included adapter.plates.
    Date published: 2014-06-29
    Rated 4 out of 5 by from works well, needs some modification had to cut the ears with a hack saw to fit inside the grill, but other than that everything matched up.
    Date published: 2014-06-26
    Rated 5 out of 5 by from Excellent service Have used my gas grill for 9 1/2 years and have been very pleased with this product.
    Date published: 2014-06-25
    Rated 2 out of 5 by from It works for a while This is a replacement part that does the job while it lasts. Unfortunately, it is not as good as the original part, so it doesn't last very long. You can expect 1 year of use before you'll have to replace it again. You might be able to stretch that a bit, but it will have corroded so much that you will have flare ups around the back of your burners. I've started buying them 2 at a time (for 1 grill) just to save on shipping costs. For reference, we use our grill year round at least once a week and keep it covered or in the garage between uses.
    Date published: 2014-06-25
    • 2015-10-05T06:05CST
    • bvseo_cps, prod_bvrr, vn_cps_3.1.6
    • cp_1, bvpage1
    • co_hasreviews, tv_7, tr_164
    • loc_en_US, sid_80012481, PRD, sort_mostHelpful
    • clientName_Charbroil

    I have  series model number 463251505.  I need a burner brace with carry overs.  Part number 80002834 is called out in manual.  Will this part work in my model.

    Asked by: lisa marie
    Yes. Model # 80012481 is the correct part needed for your grill.
    Answered by: DustinR
    Date published: 2015-09-28

    My grille (#463251605) has more than full flame at the rear of the burners (by the brace) but almost none at the front.  I have taken it apart and cleaned out all of the flame holes and the feed tube in the burners.  This did not do the trick.  

    Asked by: Jeffrey Keicher
    The back of your grill has carryover tubes that allow the flames to transfer from burner to burner and this creates the extra heat. This added heat will help with searing your food. Please give us a call at 1-800-241-7548 and we will be able to provide more information and best assist.
    Answered by: DustinR
    Date published: 2015-08-26

    will part # 80012481 work with my commercial series model# 463240804 grill?

    Asked by: gunner46
    No. We apologize, but the burner brace for your grill is no longer available.
    Answered by: DustinR
    Date published: 2015-08-14

    Good morning, I have a grill model #463251605 and I need the carry over tubes. This grill has 3 burners with 2 carry over tubes.

    Asked by: Richard M
    Model # 80012481 is the correct burner brace needed for your grill. This will include the carryover tubes.
    Answered by: DustinR
    Date published: 2015-07-29

    will it fit model# 463251605

    Asked by: CarlM
    Yes. This is the correct burner brace for your grill.
    Answered by: DustinR
    Date published: 2015-07-06

    Will this burner brace fit Professional Series Grill 463233503?

    Asked by: DougB
    This burner brace extends from 23.5" to 25". Please check the dimensions of your grill to see if this will best fit.
    Answered by: DustinR
    Date published: 2015-06-16

    Will this brace extend from 23.5" to 24.8" and Is this stainless steel?

    Asked by: Jimmybbq
    Yes. This burner brace extends from 23.5" to 25" and is made of stainless steel.
    Answered by: DustinR
    Date published: 2015-06-16

    Will this brace work with our 463268008 model Commercial series grill?

    Asked by: RandyLach
    This burner brace will not fit your grill. Each carryover tube for your grill is model # 80005592. This part is available on the Char-Broil site.
    Answered by: DustinR
    Date published: 2015-05-28
    • 2015-10-05T06:08CST
    • bvseo_cps, prod_bvqa, vn_cps_3.1.6
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_25
    • loc_en_US, sid_80012481, PRD, sort_recentAnswersFirst
    • clientName_Charbroil