Char-Broil Commercial Series 580 4-burner Infrared Grill - Model 463247311

Model # 463247311

Note: This item may not be available for sale but is still supported by Char-Broil. Replacement Parts can be found on the tabs below.

Quick Overview

4-Burner Commercial Series™ Quantum® Dual Fuel® Infrared Gas Grill with Outdoor Stovetop™ Side Burner and Auto-Clean™ Feature
Char-Broil® Commercial Series™
Infrared grills are sold exclusively at Lowe's More info »
  • Patented Quantum infrared cooking system
  • 40,000 BTU stainless steel main burners
  • 13,000 BTU Outdoor Stovetop side burner with 170 sq. inch non-stick griddle included
  • Converts to natural gas with Dual Fuel Conversion Kit, sold separately
  • 580 sq. inch stainless steel Quantum primary cooking grates
  • 230 sq. inch glossy porcelain-coated wire secondary cooking surface
  • Auto-Clean feature automatically shuts off after cleaning cycle
  • Stainless steel lid, handle, doors, control panel and fascias
  • Appliance style, 2-door cart
  • Silver painted side shelves
  • SureFire electronic ignition
  • Grate level temperature gauges
  • 4 casters - 2 locking and 2 non-locking
  • Contact us for more info on this product!

    VIDEO: Quantum Infrared Grilling Testimonials

    Infrared Grilling Made Easy.™

    See what consumers are saying about Quantum Series Infrared Gas Grills...

    Chapter 1                            Chapter 2 


    VIDEO: How to Season your Char-Broil® Quantum® Infrared Grill

    VIDEO: Seasoning Your Quantum® Grates


    Just like grandma’s cast iron skillet, the stainless steel Quantum® Cooking System will need to be seasoned prior to use. This is most important as it will optimize cooking performance. In addition, it will make cleaning easier and inhibit rusting. Coat all surfaces of the Quantum® Cooking System (Grates and Emitter plate) with vegetable oil. If you use a spray, which is easier to use, wipe down the Quantum® Cooking System after spraying to ensure an even coat. Start your grill and let it burn for 15 minutes – or until the vegetable oil burns off and stops smoking. The shiny finish on grates and emitter should now have a very dark brown or bronze color.


    Your grill is now seasoned and you are ready to cook. The more you use your Quantum® grill the better it will cook. The darker - more seasoned - the cooking chamber becomes the hotter and the more evenly it will cook. A light coat of vegetable oil after each use (once the grill has cooled) will keep the surfaces seasoned and help prevent any rusting – again, just like grandma’s cast iron skillet. The next time you grill go ahead and wipe the grilling surface with a well oiled cloth prior to starting your grill. This should remove any debris that may have accumulated and will help prevent your grilled foods from sticking to the cooking surface. You are now ready to pre-heat your grill and start grilling.


    So, the three basic steps are:

    • Make sure to season your grill prior to the first use. Coat all cooking surfaces with olive or vegetable oil. This can be done with a spray or well-coated rag. Heat the grill for 15-30 minutes until there is no more smoke.
    • After your grill has cooled again wipe down or spray the entire cooking surface. This will coat the metal and provide a barrier to help reduce surface rust.
    • Prior to cooking again wipe down with an oiled rag. This will remove any debris/rust that may have accumulated.


    Attachment: VIDEO: Seasoning Char-Broil® Quantum® Stainless Steel Infrared Grill Grates

    VIDEO: How to Clean Your Char-Broil® Quantum® Infrared Grill

    VIDEO: Cleaning Your Quantum® Grates

    After each use it is advised that you burn off any excess grease and food debris that has accumulated on your grates.


    Turn the grill to HIGH and close the lid. Leave it on for around 15 minutes and this should turn any remaining food debris to ash. After the grill has cooled, yet still warm, remove any remaining food particles from the cooking grate using a wire brush.


    Periodically, as food debris accumulates on the infrared emitter plate, it is recommended that the grates be removed from the grill so that the infrared emitter plate can be cleaned and ash removed.


    Separate the grilling grate from the infrared emitter and brush the emitter plate with a heavy-duty wire grill brush, such as the BrushHawg or the Quantum® grill brush available at   


    Baked-on food particles can be removed with the metal scraper on the back side of the grill brush. The stainless steel grilling grates and infrared emitters can also be tapped lightly together to remove baked-on debris and ash.


    Always coat the grates and infrared emitter plates with a light coat of high-heat cooking oil after cleaning. This added layer of protection will help ensure your Quantum® Infrared grill will be ready for your next grilling experience.

    Attachment: " target="_blank">How To Clean Your Char-Broil Quantum Grill

    Quantum® Grilling Guide

    Attachment: Quantum® Infrared Grilling Guide