Gas to Charcoal in 60 Seconds. Learn More!

Electronic Ignition Module

Model #G651-1300-W1

Electronic Ignition Module

Model #G651-1300-W1

  • Measures approximately: 2.8" L x 2.6" W x 2" H.
  • Includes one electronic ignition module with button
  • For us in multiple Char-Broil 6-Burner, Char-Broil Classic, and Kenmore Gas Grills.
  • Please check your owner's manual to make sure this part will work with your grill.

    Find Parts For Your Grill

    How do I find my model number?



    • Manufacturer: Char-Broil
    Electronic Ignition Module is rated 3.5556 out of 5 by 9.
    Rated 5 out of 5 by from perfect fit I ordered a new igniter module and it works great just in time for spring grilling ordering was simple and quick delivering
    Date published: 2016-04-02
    Rated 4 out of 5 by from Installation a bit tricky I had to remove the fuel manifold to replace the ignition module. Not terribly difficult but tricky since I had to lay the grill down on its back to see what I was doing. Replacing the module itself was a snap.It's my own fault I had to replace the module...I didn't cover the grill over the winter and rainwater ruined the contacts.
    Date published: 2016-05-26
    Rated 1 out of 5 by from Worked for a week I received this item a week and a half after ordering, installed it and it worked the first time I used it. Went back to grill a week later, nothing. No spark, not even with a new battery. Won't be buying again, but will continue to use a long lighter to ignite my otherwise great grill.
    Date published: 2016-04-07
    Rated 4 out of 5 by from Works like original Ordered product online, arrived in less than a week. Works great, but was very hard to install. Not enough clearance behind controll panel. Installation instructions would have been welcome.
    Date published: 2016-02-15
    • 2016-05-31T06:11CST
    • bvseo_cps, prod_bvrr, vn_cps_3.2.1
    • cp_1, bvpage1
    • co_hasreviews, tv_1, tr_8
    • loc_en_US, sid_G651-1300-W1, PRD, sort_mostHelpful
    • clientName_Charbroil

    My module has moisture & rust inside and does not function at less than 6 weeks old. I do not find an o-ring to help seal out any of the moisture. Should there be an o-ring to prevent moisture from getting inside? A case has been created.

    Asked by: TechDPh
    The cap for the ignition module should tighten down enough to help keep moisture out. If a case has been created with us we will be reaching out to you soon so that we can best investigate and help to get you back up and grilling.
    Answered by: DustinR
    Date published: 2015-11-18

    What is the easy way to remove the old module and install the new module?

    Asked by: kennyg123
    In most cases the battery cap will unscrew and allow the ignition module to be removed. Give us a call at 1-800-241-7548 and we will be able to gather more information on your grill so that we can provide the most accurate steps.
    Answered by: DustinR
    Date published: 2015-10-28

    where can i buy this in canada?

    Asked by: Jdog
    This ignition module is only available from Char-Broil. It can be ordered on our site or by giving us a call at 1-800-241-7548. It can be shipped directly to you.
    Answered by: DustinR
    Date published: 2015-08-19

    I found the part I need (ELECTRONIS IGNITION MODULE) Will there be installation instructions shipped with the part?

    Asked by: 761576157615
    Installation instructions are not included with this ignition module. Give us a call at 1-800-241-7548 when the part arrives and we will be able to provide installation instructions.
    Answered by: DustinR
    Date published: 2015-07-31
    • 2016-05-31T06:18CST
    • bvseo_cps, prod_bvqa, vn_cps_3.2.1
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_13
    • loc_en_US, sid_G651-1300-W1, PRD, sort_recentAnswersFirst
    • clientName_Charbroil

    Related Information