Learn More About Wi-Fi Enabled Smokers



Model #G206-0301-W1

  • Measures approximately: 3.6" L x 1" W x 1" H.
  • Range Master, Thermos, Quickset, Heartland, and Char-Broil Gas Grills
  • Includes one push button for ignitor
  • Please check your owner's manual to make sure this part will work with your grill.
  • Replaces part number G102-0028-W1, and 80008490.

    Not sure if this part will fit?

    How do I find my model number?


    • Manufacturer: Char-Broil

    Does this ignitor require a battery for operation? I'm not seeing any replacement information in the manual

    Asked by: SteveV4389
    A battery is not required with this ignitor.
    Answered by: DustinR
    Date published: 2015-07-13

    will ignitor button g206-0301-w1 work in char broil model 463335014

    Asked by: cherokee
    No. The electronic ignition module for your grill is model # G511-0055-W1. The switch is model # G515-0017-W2A. Both of these parts are available on the Char-Broil site.
    Answered by: DustinR
    Date published: 2015-06-24

    the electrode wire broke off the ignitor. can this be replaced easily?

    Asked by: hide
    This wire should easily pull off the end of the ignitor so that a new one can be attached. Give us a call at 1-800-241-7548 for more information.
    Answered by: DustinR
    Date published: 2015-06-08

    Where does the electrode wiring from the the side burner attach to ignition button? The diagram in the directions is horrible. It appears it attaches somewhere on the ignition but I can't make it out

    Asked by: imlady
    I recommend giving us a call at 1-800-241-7548. We are available 8:00 am to 9:00 pm EST Monday-Tuesday and 8 am to 6 pm EST Wednesday-Friday and 10am to 9pm EST Saturday. Once we have the correct model number for the grill we will be able find the correct assembly manual.
    Answered by: WhitneyC
    Date published: 2015-06-25

    My ignition is not working. If I buy a new iginitor how do I get the wires off the old iginitor to reuse them?

    Asked by: Kennyo
    The ignitor wires on any push button ignition(red button) will be easily removed from the electrode on the burner by carefully pulling the wire from the electrode. The wire can then be removed in the same fashion from the bottom of the ignition.
    Answered by: JosephCB
    Date published: 2014-08-03


    Asked by: NMP536
    No. This is simply the ignition button. The electrode wiring would have to be purchased individually.
    Answered by: Alyssa
    Date published: 2014-07-18
    • 2016-02-10T06:18CST
    • bvseo_cps, prod_bvqa, vn_cps_3.1.6
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_6
    • loc_en_US, sid_G206-0301-W1, PRD, sort_recentAnswersFirst
    • clientName_Charbroil