Custom-designed for the Char-Broil® XL Heavy-Duty Smoker Cover.
- Weight: 3.00
- Model Number: 4784960
XL Heavy Duty Smoker Cover is rated out of 5 by 9.
Rated 1 out of 5 by JJ1955 from Does not hold up I bout this last fall and covered the smoker for the winter. Spring came and I went to take the cover off and it was full of holes. This does not hold up to winter conditions. I am very displeased with this cover and would not recommend this to anyone.
Date published: 2015-06-29
Rated 4 out of 5 by Brooks from Good but not great. I like the grill cover. I bought an off-set Char-Broil Smoker and I wanted to make sure it was covered properly so I stayed with the brand on the cover as well. It does its job. The only issues are that it stretches pretty thin at the smokestack like it's about to poke through and it's light enough to have been blown off twice.
Date published: 2014-06-28
Rated 2 out of 5 by JRTUC from too big for OK Joe Highland This cover was recommended by Charbroil instead of the custom cover for the longhorn. I would try to find something smaller. This drags the ground and you need to tie it back with bungee cords or it will blow off.
Date published: 2015-05-15
Rated 5 out of 5 by saints10fan from Easey to set up. Operating Instructions simple to There is no turning back after you experience cooking/smoking on a char-Boil product.
Date published: 2014-06-20
Rated 5 out of 5 by BigJoe3rd from Vinal Grill / Smoker Cover Heavy duty enough for the price (Value). Pin it at the ends with clips. Keeps the flapping to a minimum in the wind. Should hold up for a year or three or four. I'm happy!
Date published: 2014-06-25
Rated 1 out of 5 by SEscolano from Too Big & Cheap Plastic The Char-Broil Smoker COVER is way TOO BIG (WIDE) & LONG (DRAGS ON THE GROUND) & it's a VERY CHEAP PLASTIC.
Date published: 2014-06-20
Rated 5 out of 5 by K1461 from GREAT PRODUCT/GREAT VALUE I bought the cover over a year and it has held up extremely well even in the south Texas heat and summer storms.
Date published: 2014-06-13
Rated 5 out of 5 by Pam123 from Great product The grill cover works great. Fits very well on our grill, easy to put on and off.
Date published: 2014-06-10
Will this fit snug onthe deluxe bbq smoker grill 1280 model #14201571?
The XL Heavy Duty Smoker Cover is not a snug fit, but will still work well to protect your offset smoker.
Date published: 2015-08-19
It states that this cover is 72" wide, however, my Oklahoma Joe Longhorn 3-in-1 Burner (propane, gas, side burner & smoker box) is listed as being 74 inches wide. So, it's going to come up short by 2 inches? Why didn't you design a cover for this specific
We apologize that there is not a cover available at this time. Please give us a call at 1-800-241-7548 and provide us with the model number for your grill. We will be able to further investigate.
Date published: 2015-06-24
does the XL heavy-duty smoker cover fit over the Highland offset smoker. the picture doesn't show the offset, but it looks like there is additional material at that end.
This Heavy Duty XL Smoker Cover measures 72"W x 36"D x 55"H. Please check the dimensions of your offset smoker to make sure this will best fit.
Date published: 2015-06-16
What cover will fit the Longhorn Offset Smoker model 13201747-50?
This Heavy Duty XL Smoker Cover will be the best fit grill cover for your offset smoker.
Date published: 2015-07-15
You say this cover will fit the Oklahoma Joe's Longhorn grill/smoker combo. Lowe's website has the assembled dimensions of this grill as 50.63 H x 74 W x 31.5 D. Dimensions of this cover is 72"W x 36"D x 55"H. It is not wide enough?
Please provide us with the model number for the Combination Grill so that we can best investigate this.
Date published: 2015-05-18
What are the dimensions for this unit - length, width.
This Heavy Duty XL Smoker Cover measures 72"L x 36"W x 55"H.
Date published: 2015-05-11
Will this cover fit Oklahoma Joes Longhorn charcoal/gas / smoker and grill. Model # 15202029
The Heavy Duty XL Smoker Cover (model # 4784960) will fit this combination grill and smoker. This cover is available on the Char-Broil site.
Date published: 2015-04-25
when facing my char-grill smoker the offset is on the left side and the smoker stack is on the right side, will your cover work in reverse?( model # 4784960)
This offset smoker cover is designed to fit Char-Broil offset smokers. We apologize, but there are no plans, at this time, of a different design.
Date published: 2015-01-27