My grill has low flames and will not get hot enough to sear my food. What is the problem?

Low Flow or Low Flames are generally characterized by having one or more of the following concerns:
  1. Damaged component
  2. Overpressure device activated
  3. Obstruction
  4. Poor Connection

Low Flame in Gas Grill

The most common problem is that the overpressure device has been activated. Since 1995, all regulators (the part that attaches to the gas tank to regulate the flow of gas) in LP gas grills have included a safety device that restricts the gas flow in the event of a gas leak. But, you can inadvertently activate the safety device without having a gas leak. This typically occurs when you turn on your control knobs before you turn on the LP tank valve. If you do activate the gas regulator safety device, the grill will only reach temperatures between 250 and 300F even with all burners on the high setting.

How to reset the gas regulator safety device:
  1. Open the grill lid.
  2. Turn off all knobs on the control panel in front.
  3. Turn off the tank knob. * Disconnect the regulator from the LP tank.
  4. Wait 30 seconds. * Reconnect the regulator to the LP tank.
  5. Slowly open the LP tank knob all the way open. Do not put excessive force on the valve at the full open position to avoid damaging the valve.
  6. Turn on the appropriate control knob and light the grill per the instructions on the control panel.

For a more detailed, illustrated explanation of this and other possible issues, please click the link above to download a document or click the video link for a detailed video of the reset procedure. The video requires the free installation of Quicktime in order to view.

Low Flame in Natural Gas Grill

For Natural Gas grills - You must either have a natural gas model or have had your grill converted by a gas service technician/gas plumber before connecting to a natural gas source for proper performance. Your gas service technician can provide you with the correct pressure for your area and will inform you if a regulator is needed. If your grill has more than 65,000 BTU’s, a 3/8” hose may not allow enough gas to flow. In this case a 1/2” hose is recommended. If your grill is natural gas, there could be a low gas line pressure or there could be an increase in the gas demand thus causing low gas pressure. If you do own a natural gas grill and you are experiencing low pressure please contact your local gas company.


Low Flame PDF Download